Mark (xero) has been busy recently with a router and some Aluminium sheets recently and made a template Air Diversion Plates.

Price
$60.00NZD +postage

Shipping
Within NZ (Parcel Post) - $6.00NZD
To Australia (Traceable) - $27.50NZD

Purpose of the plate
1) Underbonnet bling!
2) Improve your radiator’s cooling efficiency, by forcing as much air as possible through the core.

When
Should hopefully be ready within 4-5 weeks, most likely sooner

Who
Both VIP Members and standard members.
Only 17 available so get in quick!

Will be only be available in silver aluminum.

Aus members:
I will PM you Paypal details :)

NZ members:
- Can pickup after hours from North Shore (and cash on pickup)
- Have it sent to you and organise payment via Internet Banking (PM for details)
Please post here if you want one, and where your located and if your in NZ, please state if you want it sent or or picking up

I have attached an image with Mark's mockup installed.
Final product will be silver and venting will differ slightly from shown


Who are interested:
1) xnickx - NZ
2) xero - NZ
3) streamz - NZ - Sending (PAID)
4) 4815162342 - NZ - Sending (Payment details sent)
5) ridin_dirty - NZ
6) TNT200 - Aus Melbourne (PAID)
7) E910 - NZ (PICKING UP FROM xero)
8) oriphin - Aus NSW (PAID)
9) madaltezza - NZ - Sending (PAID)
10) vinex_88 - NZ (PICKING UP FROM xnickx)
11) zata40 - NZ - Sending (PAID)
12) mikeynz - NZ - Sending (PAID)
13) jeremyflower - NZ
14) lonestar - NZ - Sending (PAID)
15) ThunderChicken - NZ - Sending (PAID)
16) Outlander - NZ - Sending (PAID)
17) koz - NZ

Please note I will be pruning the thread to keep this page clean, so after I've sent you your PMs with details etc, I will delete your posts after a few days :)

Another update:

Pic of the first one installed...



Thanks to all for getting on board for this group buy! Not long now!

wow...look awesome....it looks exactly the attach image of Mark's mockup installed on the frist post.
Can't wait for mine so when will i receive one Nick.....:-))

As soon as I get them in my hands and get a chance to pop into the post office :)

Actually email me your delivery address again ;D

OK but couldn't wait.... :P
PM sent regards address...cheers

any idea on when we will get these?

The rest are getting folded as we speak so as soon as this is done I will give to nick and he will be sending off. So soon mate. Real soon!

They are ready!

Nick will have these to pick up as of 5pm tonight and the rest will be
posted as soon as possible.

Thanks again guys!

Brilliant Mark!

Will send PMs to ridin_dirty, vinex 88 and koz.

Cheers!

Got these here with me now, will start packaging and sending them off slowly throughout this week team :) , boxing aluminium air diversion plates is harder then it sounds haha!

Will be sent out in the order listed in the 1st post (since they were first to get their money in etc)

Also, through the production run, we have got 6 extras for people who missed out!

I got one at my house and 5 are with Mark, so depending where you work/live you can pick up the additional plates from either me or mark

Good news Nick :) cant wait, going to be the only one in NSW =D

Having some fun chasing down the filters lol the couriers are monkeys

All posted and in the mail :)

Will need to take another look at shipping within NZ as some of them turned out to be more the $12! Oh well, can only learn right :P

Id be keen for one if enough interest for a round 2. <_<

Turned up this morning :)

Was a little bent in the middle, but nothing I couldn't fix :P

Cheers Mark and Nick

Bummer Cody, hope it wasn't too bad?

Bloody NZ Post! Don't the read the red sticker? :P

Had TWO red stickers on it too!! LOL

Was just bent in a little bit on the top flat face above the bonnet latch hole, managed to straighten it out by hand.

Its all good :P

Received mine yesterday. Despite the excellent packaging it was a little bent. Once bolted down it was fine though.

Looks great.

BAH @ NZ Post! Anyone else have troubles with them bending? Might have to reinforce them packaging for future packages.

Glad people are happy with them :D

It is unfortunately very very soft aluminium, it will bend very easily but also should straighten just as easily if you're careful.

Painting is a good idea as the aluminium will scratch easily too. The next batch (if we do another one...) will have to be made from a better quality aluminium just to make them easier to handle if nothing else ;-)

Protective masking tape courtesy of Her Majesty's New Zealand Armed Forces :-)

Yeah, they bent mine too. But no biggie, was an easy fix ;)

i had to modafy mine iv got one more hole in mine for my oil cooler but that ok and mine had a scratch on it but hay it fits and it look good thanks guys

Remember to post up some pics of it fitted, I know they all look the same but we're all about the pictures here :-)

Received mine yesterday. It was bend badly in the middle but will get it fit straight without drama.
Thanks Nick

Man now im worried about what the aus couriers will be like, they are meatheads got in a verbal fight with one yesterday, the filters i got from Nick almost got sent back to NZ :P

troy.... least it wasnt TNT, i have video camera footage of them just leaving a note saying "sorry we missed you" without even bothering to knock!

is spent 45 minuets at the post office i almost hit the guy, and i had to go there twice because the 1st time they claimed they lost it..

lazy mofos

x2

Picked mine up today :) looks good, a bit different from the aftermarket branded ones in the way that it wont fit under the lip on the grill.

Also had to remove a bolt, not sure what its for, so piece of plastic that runs along under front chassis bar

Ill get a pic when i can, oh and surprisingly no bends or scratches here =D

Glad I picked mine up from Mark by the sounds of things. No bends here & I got a bonus with mine :P
What would be a good way to protect it from any scratches once installed, clear coat or carnauba wax?

I got clear coat on my C/F one and where the bonnet rubber touches it, its left a mark arcoss it.

change the thread title to [closed]? unless you have any more of these bad boys :P

if there are any left at the end of next month.. say about the 29th

XnickX - Maybe bring the remaining units with you, might be able to scratch up the coin for one :)

Clear coat would be the way to go, unless you just want to paint it.

I'll try to grab some off Mark, xero holds them and are his, I'm mearly helping to organise the GB on his behalf.

But yes I will bring a few down with me if there are some left at that stage, probably best to remind me via PM closer to the date :D

Hi all

I have 3 of these left for sale if anyone is interested. Ill be putting these on trade me at the end of the week. start ing at $75, so if your keen to get in before they are all sold?





I also have the 'Sample' one for sale, this was the first one so has a couple of minor scratches and dents in it. Let me know if your interested in this. $35 (still costed me to make it)

Alright.. All gone, Nick, can you close this up...

IF I get another 12 people wanting them I can do another run, thats the min I can do.

Still wanna see everyone's fitted pics... xnickx's is the only one I've seen posted so far other than's Xero's sample pics

how about you kick us off then mate?